We list 15 replacement parts for the SAIC (MG) MG HS, spanning Body Parts, Clutch & Transmission, Electrical, Engine Parts and Filters. The MG HS is a compact SUV launched in 2018, sharing architecture with SAIC's Roewe RX5 family. It is offered with 1.5 and 2.0-litre turbocharged petrol engines and, in several markets, a plug-in hybrid derivative.
15 products listed
Engine Parts for the MG HS. MOQ: 50
Clutch & Transmission for the MG HS. MOQ: 50
Electrical for the MG HS. MOQ: 50
Electrical for the MG HS. MOQ: 50
Body Parts for the MG HS. MOQ: 50
Body Parts for the MG HS. MOQ: 50
Electrical for the MG HS. MOQ: 50
Suspension for the MG HS. MOQ: 50
Suspension for the MG HS. MOQ: 50
Cooling System for the MG HS. MOQ: 50
Engine Parts for the MG HS. MOQ: 50
Filters for the MG HS. MOQ: 50
The 1.5 and 2.0-litre engines use different cooling packages and, in several markets, different brake sizes. The plug-in hybrid differs again. Establish engine and powertrain from the VIN.
SAIC Motor, headquartered in Shanghai, is one of China's largest vehicle manufacturers and has operated joint ventures with Volkswagen since 1984 and with General Motors since 1997. The MG marque it sells internationally is originally British — Morris Garages, established in 1924 — and was acquired by Nanjing Automobile in 2005 before passing to SAIC when the two companies merged in 2007.
Parts for the SAIC (MG) MG HS are grouped by category: Body Parts, Clutch & Transmission, Electrical, Engine Parts and Filters. In part-type terms the listings cover air filter, alternator, brake discs, brake pads, clutch kit, control arm, front bumper, fuel pump, headlight, oil filter, radiator, shock absorber, side mirror, spark plug and starter motor. Coverage is organised by model rather than by model year, because a year on its own does not determine fitment — engine variant, trim, market specification and mid-life revisions all change part numbers within the same year.
A crossover carries more mass and a higher centre of gravity than a sedan on the same footprint, which loads dampers, springs and suspension bushings harder and gives the brakes more energy to dissipate. The larger frontal area also means the cooling system works harder in slow traffic.
Of the parts listed for this vehicle, these are the ones to watch, with the symptom that usually announces them:
Fitment is confirmed from the VIN and from the number on the part being replaced, not from the model name. The VIN is the 17-character vehicle identification number stamped on the chassis and shown on the registration document, usually visible through the base of the windscreen and on a plate in the door aperture. It encodes the manufacturer, the model, the body and engine variant and the production sequence, which is why it resolves fitment questions that a model name cannot.
Send the following and the enquiry can be quoted against a specific part number:
Sino Drive Components lists 15 replacement parts for the MG HS, covering body parts, brake system, clutch & transmission, cooling system, electrical, engine parts, filters and suspension. Orders are quoted by enquiry for importers, distributors, workshops and individual buyers; the minimum order quantity is shown on each part, and mixed loads with other models and brands can be arranged on request.
To price a part, add it to the quote cart or send the VIN and the number on the old part. We supply original-equipment and premium aftermarket replacement parts and can assist with export documentation. SAIC (MG) is a trademark of its owner. Sino Drive Components is an independent export supplier and is not the vehicle manufacturer; the name is used only to identify the vehicles the parts are listed for.
Filter the listings above by category, or open the category guide to read what the components do and how to specify them.
Parts for the rest of the SAIC (MG) range, or return to the SAIC (MG) brand page for the full model list and sourcing notes.
There are currently 15 listings for this vehicle, covering Body Parts, Clutch & Transmission, Electrical, Engine Parts and Filters. If the component you need is not shown, send the VIN and the OEM number and we will check whether it can be sourced or cross-referenced from a related model.
Work from the VIN and the number on the part you are replacing rather than from the model name. The 1.5 and 2.0-litre engines use different cooling packages and, in several markets, different brake sizes. The plug-in hybrid differs again. Establish engine and powertrain from the VIN.
For anything in the engine bay, yes. The same model is frequently sold with more than one engine across markets and model years, and filters, ignition parts and cooling components follow the engine rather than the badge. The engine code is stamped on the block and is recorded against the VIN.
Send the enquiry with the quantity you actually need and it will be quoted on that basis. [CLIENT TO CONFIRM: whether single units are supplied, and the minimum order quantity that applies per part.]